Had a client come in wanting to get attention for his business when he's out helping local high schools during football games and other sporting events. What better way than some insane flashing lights?
Installed this custom underbody LED kit for him
50 Linear Feet of LED to LED, fully wrapped brightness.
Most underbody kits have around 10-15 feet of neon or LEDs, so you get wheel gap.
This kit was custom installed to provide all around under carriage lighting.
Along with the kit, I installed a wireless 16 setting remote control kit.
He can manually control how bright the lights are, select multiple different strobe settings or turn on breathe mode (my favorite).
Had a client with a 2009 Dodge Ram come in wanting a serious HID Upgrade.
Recieved Digital Low/High Beam 6000k HIDs as well as some Digital 6000k Foglights.
The trick with this one was the Dodge's CAN-BUS system. In the past you've usually had to bypass the headlight circuit and splice the system into the Parking Light circuit...it worked, but sucked.
Not now....the specially made harness solved all these issues and everything works as it should.
He also had his driver side fog lamp recieve a HUGE rock chip that damaged the housing...so I replace that as well.
Bright Bright Bright!!
Had to take some extra care with these MC-R shrouds that cover the FX-R projectors I'm retrofitting into these Solsti lights. These are a newer-ish shroud that I have yet to install, so I'm pretty stoked for the outcome. The Halo will sit behind the oval cutouts and will give a nice even glow due to the frosted plexi lens in between.
Waiting for them to set and I'll have these back together in no time.
Got the projector taped off and everything ruff sanded for primer.
Primer down
High-Temp Low-Glass Black Down
Ready for paint on the shroud...just need to get the red!
Had a return client bring in his new 2007 Subaru Outback for some HID additions.
He was used to the custom Bi-Xenon Projectors I retrofitted into his old ride, that he had to have the same output in his new ride.
This is the only time it's really ok to put HIDs in a stock housing. When they have stock projectors. Output was same as stock, just brighter. No glare on low beam whatsoever.
Installed our Digital High Intensity Discharge kit in both the low beam and high beam areas.
hope you like
RSS Feed