Here are some Bi-Xenon Projectors I did for a client in Texas.
2009 Pontiac Solstice
Wicked Stock Paint color (red-ish metallic)
Brand New FX-R Hybrid Bi-Xenon Projectors (Version 3.0)
Internals Modified and Painted to give off a red demon eye when not lit
Morimoto 6000k 35 watt HID Bulbs
Morimoto 35 watt Ballasts
Morimoto Dual CCFL Halo Accent Lights
Custom H13 Bi-Xenon Heavy Duty Harness with Morimoto Relays
This was a custom project, where there was a lot of back-n-forth communication with
the client to get this just right. We originally painted these ALL Wicked Red to see what it looked like (see Corvette headlights). They turned out great, but after looking at them with
the client, we decided to break it up a bit and paint the stock reflector black….and that did it….perfect! Another thing on this one was that he wanted dual accent lights in there
somehow…whether that was going to be just CCFLs, LEDs or combination of the two.
We finally decided on Dual White CCFL lighting accents, one placed behind the shroud to give it the ‘Iron Man’ look and another one mounted just behind the Shrouds outer lip, so that it gives off a nice back lit circle.
The lenses on these things were bad when I received them. Not horrible, but as with
ALL Solstice lights nowadays, you think they are fine because chrome hides a lot, but as soon as you paint the chrome ANY color, the flaws POP….and this one had internal and external blemishes and dings. My painter worked them over for a few hours and cleared them up the best he could. Muuuch better than they were before; so client will be happy with that. All in all, this was a great project….
Got the Wicked Solsti headlights retro'd and ready for owners final decision on whether to leave it all wicked or add some black accent paint in there.
So far they look good....they'll look even better once I'm done adding the CCFL lighting....but for now they will remain all wicked.
My painter bro-namath got to all the parts I sent him.
Here is some progress pics of them.
I'll be assembling these for client approval soon.
Till then...
Got them all sealed up, cleaned up, packaged up and ready to go.
Snapped these pics to finish off the build pics.
Next up? On-Car pics whenever the client gets them to me.
Cheers
Got the CCFLs (two per shroud) attached to the shrouds
Projector has been hand-painted (couldn't masked off LED holes)
Mounted the Shrouds, soldered all the wires, tested all the lights.
Just waiting for the shrouds to cure and we'll be good to seal these badboys up.
This shroud/projector combo was the hardest I've had yet. Didn't help that I tried to stick 3 sets of CCFL's behind them. Unfortuneately, they don't make a size that would fit that last ring and even if they did, it wouldn't have fit on the FX-R projector. I had to doctor these shrouds up in order to get them to fit just by themselves.....then add a strip of LEDs for the Demon Eyes, and 2 CCFLs to the mix and it took some crafty shifting to get these on.
All-in-all, I'm pretty happy with the outcome.....it's hard to tell how these will pop because of all the black, but they will for sure finish off that Brazen solsti once they get put on...it's such a good color when you match it with black, that these headlights will look siiiick!
....now......we wait.....
New Solstice Headlights.
This time they are going on a Brazen colored Solstice.
Brazen is Pontiac's (GM) Burnt Orange Color...it's called Inferno Orange.
Pretty cool color...has a mix of Red and Orange.
These ones will be special:
FX-R Projectors with clear lenses
G37 Shrouds Painted Brazen Orange
Dual Halo's behind G37 Shroud
Orange/Amber Demon Eye LED Accent Lighting
Everything else painted Gloss Black.
Will be ready for paint tomorrow and the next day
Got these guys all polished up and somewhat ready to go....I think I might clear coat the lights to give them that perfect look.
Problem with these lights is that the lenses had a fiberglass cover over them that scratched up the crystal clear look they had....owner plans on putting them back on, but wouldn't mind rockin' them naked either....I don't blame him, they look sick all black. Most people that polish headlight lense only deal with yellowing...not deep scratches....so we gave it our best shot.....and back to what those 'other' guys do, they NEVER touch the insides of the lenses....as they can't get them open....well....we do!!!!! Polished the insides of these bad boys as well. They turned out pretty good, but they were so beat up and rubbed the wrong way that I think a clear coat is all we can do now....we'll see.
Other than that, these beasts are ready to ship out. I can't wait to see them back on their mother ship!!
Salmon Division sent more freebie lights down....these ones I was going to open them up and customize them and resell, but the internals were burnt badly (hence why they were junk).
Good news is that the Bi-Xenon Projectors are still good...so I can still put these to use....
I've got a set of headlights that will work perfectly with these.
Freebies:
Bi-Xenon 3" Valeo Projectors with working Solenoid and Bulbs/Ballasts
Fake 3" Projector lens and holder
Mini Side Marker lights (2 LEDs)
All-in-all, this was a good find.
Had to take some extra care with these MC-R shrouds that cover the FX-R projectors I'm retrofitting into these Solsti lights. These are a newer-ish shroud that I have yet to install, so I'm pretty stoked for the outcome. The Halo will sit behind the oval cutouts and will give a nice even glow due to the frosted plexi lens in between.
Waiting for them to set and I'll have these back together in no time.
Got the projector taped off and everything ruff sanded for primer.
Primer down
High-Temp Low-Glass Black Down
Ready for paint on the shroud...just need to get the red!