Past Client brought his Ford in for an audio upgrade....wanted some extra bump in his truck.
Had an Arc Audio 10" woofer with a 350 watt amp that was calling his name.
Amp tucked away nicely behind the rear passenger seat and made the sub box with millimeters to spare. This sub is fairly deep, and normally you'd only mount a shallow mount in these trucks...but I didn't want to go that route....so I made it fit.

System sounds good, nice and tight bass. Truck came with an auxiliary switch panel, and we tied the amp turn-on to the 4th switch; so the owner can turn the sub on/off whenever he needs to.
 
 
This is a project I did last year and the customer didn't want to lose any storage space.....so i built a small box to house the dual 8" Digital Designs subwoofers...knowing that they wanted more.

The used amp i installed fried on him after a bolt came loose inside the chassis and did some damage.....so with the upgraded Arc Audio KSMini 500.1 amp, we gained some storage there and customer wanted more of a box built.....so a little amp cover and custom built box later.....system is much more complete!
 
 
Twas another chilly morning...but that never stops me.
It was a nice warm 46 degrees in the shop....so I put the heaters to work as I started in on this one.

Customer had an existing Pioneer AVIC-X930BT DVD player and wanted to add a subwoofer and backup camera for better low end sound; as well as bypass the Pioneer's Safety setting to allow video playback whilst driving.

Customer choose the JL Audio Stealthbox, made specifically for his Nissan; which fit almost perfectly like it would stock.  This was pushed by a 300/1 mono block JL Audio digital amp.
I ninja mounted the amp under the rear cargo area floor, so it's outta sight outta mind....and he can throw anything back there and not worry about damaging anything.

Mounted the backup camera flush mount style on the rear bumber.....only went through 3 hole saw bits and 30 mins of dremeling to get this baby mounted....but she's in there now.

Cheers!
 

1