This one was another team effort between Ryan and I....and unfortunately someone (not naming names....but it doesn't start with a 'T') forgot to take before/after pics of the truck fully finished......actually...the customer is supposed to come back for some adjustments and we'll snag pics and upload them here later.
Here is what we did:
ZONE leveling kit
FabFour Front and Rear Bumpers
30" Baja Designs S8 Light Bar
Tinted Windows
Echomaster GM Specific Front Camera
Pac-Audio GM-specific Video Integration Module
The bumpers on this one were a fun one.....the rear bumper wasn't too bad, went on with minimal issues.
The front, however, needed to have the factory bumper/fascia trimmed to manufacturer specifications.....which we did meticulously....and after we bolted the bumper on, we noticed their measurements and bumper were OFF. Normally we don't point fingers....but after measuring the bumper, we noticed it was tweaked a bit......nothing noticeable to the average Joe (sorry Joe, your mum gave you that name and now everyone uses you to compare to normalcy).....but when mated up with the factory fascia lines, it was off about 1/4".....so after continuous tweaking and fitment, we got the bumper to fit as best as possible and the customer was stoked with it.
We also tinted the windows all around to give the owner a sense of cover....as well as block harmful UV rays.
The front camera integration wasn't a big deal now that we've done a few of these modules...they are SUPER nice and really highly un-used as far as the the full capabilities of them.....but for this purpose, they are the perfect match.
The owner now has factory backup camera and can easily access the front camera with the touch of a button.....if that's too much work, this module integrates with the factory speed sensors and when he's going 10 mph or slower, the front camera kicks on to show objects that may not be seen from the drivers position.....super slick.
In the future, the owner can add side blind-spot cameras and they can be activated via button or turn-signals....
Here is what we did:
ZONE leveling kit
FabFour Front and Rear Bumpers
30" Baja Designs S8 Light Bar
Tinted Windows
Echomaster GM Specific Front Camera
Pac-Audio GM-specific Video Integration Module
The bumpers on this one were a fun one.....the rear bumper wasn't too bad, went on with minimal issues.
The front, however, needed to have the factory bumper/fascia trimmed to manufacturer specifications.....which we did meticulously....and after we bolted the bumper on, we noticed their measurements and bumper were OFF. Normally we don't point fingers....but after measuring the bumper, we noticed it was tweaked a bit......nothing noticeable to the average Joe (sorry Joe, your mum gave you that name and now everyone uses you to compare to normalcy).....but when mated up with the factory fascia lines, it was off about 1/4".....so after continuous tweaking and fitment, we got the bumper to fit as best as possible and the customer was stoked with it.
We also tinted the windows all around to give the owner a sense of cover....as well as block harmful UV rays.
The front camera integration wasn't a big deal now that we've done a few of these modules...they are SUPER nice and really highly un-used as far as the the full capabilities of them.....but for this purpose, they are the perfect match.
The owner now has factory backup camera and can easily access the front camera with the touch of a button.....if that's too much work, this module integrates with the factory speed sensors and when he's going 10 mph or slower, the front camera kicks on to show objects that may not be seen from the drivers position.....super slick.
In the future, the owner can add side blind-spot cameras and they can be activated via button or turn-signals....
RSS Feed