Boise Car Audio Stereo Installation, Diesel and Gas Performance, Bluetooth, iPod and Navigation all in one spot

Muffed Up Tundra goes under the knife

5/5/2016

A client came to us after he moved up here from Florida. Super cool dude, but has just had the runaround on everything done to his truck and hasn't satisfied with any of it.
This is going to be a 2-part build...as I'm going to build him some custom headlights to replace the monstrosities that he has currently installed.

This go-around Ryan is up first.

Here is what we put on:
4.5 rough country lift kit
2.5 fox coil over front shocks
2.0 fox rear shocks
Nfab tube bumper
40" Curved LED Light Bar
Nitto 35x12.50 20
Fuel 2 piece 20 rims
Amp research drop steps

This definitely updated the look of the truck and the owner was stoked to have it done.

Next up...headlights.....if I ever get some free time!

0 Comments

Silverado Liftage - Salmon Division

3/16/2014

0 Comments

Good friend to Trax Customs brought in his Chevy Silverado to our Salmon Division for a lift kit installation.

4" Fabtech Suspension Lift

0 Comments

GMC Sierra - Uber Mega Projector Headlights

1/18/2014

0 Comments

This project was a fun one.....did this for a buddy up in Salmon.
Basically, I was told there was no way I could fit all of this stuff into a pair of headlights.....I think I proved some people wrong...

Quad Bi-Xenon HID Projectors with Trax Logo Laser Etched into the Lens
Triple Demon Eye Accents (Red, Blue, Red+Blue=Purple)
Triple LED Strips to accent the headlight internal lines
Quad Plasma Halos
Custom Modified Switchback LED Running/Turn Signal Lights
Demons are on a wireless 2 channel keyfob that lets you control each channel separately and at the same time.....can you say 'Pull Over!!"

The back side of these headlights were gnarly, but with my handy-dandy label maker I got specifically for this job, it made identifying wires VERY easy.

JUST the LED lights on alone are enough to be seen from blocks away....these things were BRIGHT!!!

0 Comments

Trax Ram

9/9/2012

0 Comments

What's being installed:

JVC Navigation, Bluetooth, DVD Player with Sat Radio and Backup Camera
Digital Designs CM1000 Mono Block Amplifier
Digital Designs 10" 500 Series Woofers in a sealed down firing truck box
Custom Hydro-Dipped Interior Accent Panels
Projector Retrofitted Headlights All Gloss Black
Gatling Gun Version 2 Shrouds, Dipped to match interior Panels
Bi-Xenon Projectors for High/Low HID Lights
Red Demon Eye Accent Lighting
Super White LED Halos behind shroud for Iron Man V2 look
All Accent lights on custom switches
HID Fog Lights

Started this project a week ago, but due to the simple fact that it wouldn't fit in the shop, I only had a few hours a night to work on this before I lost daylight.
First thing was first, I needed to pop the headlights open so I could get them to the owner for paint, as well as all the parts to Hydro Dip to get them dipped.

This project was made even more difficult because....well.....it's a Dodge. Mopar electrical systems straight up suck....anyone that mods them will say the same.
All these electronics added, especially the lighting upgrades, had to be bullet-proof, or Dodge would let you know and have them not work properly.

This truck was recently purchased about 3 weeks ago, and it looked nothing like it did when I got it....now that I'm done, it's even THAT much more noticeable. You'll be sure to break ya' neck when this thing drives by.

Other Mods the owner has done in 3 short weeks:
MBRP Muffler
Tinted Windows
Smoked Tails
Painted all chrome bumpers either body match or black
De-Badged Exterior
Custom Made 22" Rims with 38" Toyo Tires

0 Comments

Project BaggedXelem Update

8/9/2012

0 Comments

Well...if you were at IR208 2K12, you would have seen the cart in action.

If not, here is what was keeping me up for a good 2 weeks in a row.

Got the front suspension done and welded up, re-welded the rear end and added panels and bars to mount everything else up.

Sanded down to metal the frame and bedlinered it.
Got all the air lines setup and switches for front and back up/down. Plus put a switch on the compressor so i can turn it on or off.

Was going to add a 36 volt to 12 volt reducer to the system, but the compressor needs too much power....so I had to hook up a smaller stereo battery to handle all the electronics...which is fine...that was the plan down the road for the stereo setup anyways....so this way it's already wired for me and I can easily swap a new bigger battery in there when needed.

This thing is pretty sick, love to roll around and drop the rear end and cruise.
I need to swap out the rear bags to some canisters or something...as the shocks just don't lift like they should.

Shout out to Mr. Joe Popper for knocking this bish out the park on the fabrication..couldn't have done this without his help.

0 Comments

Lifting a Yota!!

1/11/2011

0 Comments

This just in from our Salmon Division of Trax Customs :)

Got a 98 Toyota Tacoma in today.
We're doing a 3" Trailmaster Lift, 16" Ultra Motorsports Rims with 265 Toyos
And threw some new door speakers in!

Cheers!!

0 Comments

Trax Customs

We're your one stop shop for all your car audio stereo, iPod, Bluetooth, Navigation sales and installation needs in Boise, Meridian, Nampa, Eagle, Garden City, Mt Home, Caldwell, Emmett, Kuna and the surrounding areas. Diesel and Gas performance and suspension and custom fabrication all in one location. Boat audio and visual as well as home theater sales and installation. We've got the
brands and skills to get you what you need!

This is a little blog written by one of the owners, Travis, to keep you informed.

Muffed Up Tundra goes under the knife

Silverado Liftage - Salmon Division

GMC Sierra - Uber Mega Projector Headlights

Trax Ram

Project BaggedXelem Update

Lifting a Yota!!

Trax Customs

Archives

Categories