Watching paint dry really does suck.
Aligned the lights so they are as close to plug-n-play as possible as far as beam cutoff height. Disassembled the projectors, figured out the LED locations, taped everything off and shot some engine enamel on them....3 coats later and these guys are ready for final assembly.
Also, painted up the RadioActive halos. With the help of a jig I made, I was able to make sure the lines will line up perfectly once placed on the halo. After some precise measuring and some razor blade trickery that would cause a surgeon to smirk, we have this!!
Cheers
Aligned the lights so they are as close to plug-n-play as possible as far as beam cutoff height. Disassembled the projectors, figured out the LED locations, taped everything off and shot some engine enamel on them....3 coats later and these guys are ready for final assembly.
Also, painted up the RadioActive halos. With the help of a jig I made, I was able to make sure the lines will line up perfectly once placed on the halo. After some precise measuring and some razor blade trickery that would cause a surgeon to smirk, we have this!!
Cheers
RSS Feed